76 Clutch Clutch operating clearance: check at handlebar lever every 15000 km (10000 miles) Correct free travel is 2 +- 0.5 mm (0.08 +- 002 in). Adjust if necessary. Figs. 76 and 77 1. Slacken the locknut (1) on the wire cable adjusting screw. 2. Turn adjusting screw (2) until distance 'C' at the gearbox end is 201 + 2mm (7.91 + 0.08 in).The lever should be app. 4 deg. to the rear of vertical.

77 3. Tighten locknut (1) again firmly.  4 At the gearbox-end adjusting screw, unscrew locknut 'A' (13 mm wrench). 5 Turn adjusting screw 'B' (10mm wrench). until free travel at the clutch handlebar lever is 2 +- 0.5 mm (0.08 +- 0.02 in). 6. Tighten locknut 'A' again firmly.

Tightening torques Note: To obtain mkp values from Nm, divide by 10.   Nm lb.ft Spark Plugs 23-30 17-22 Cylinder head 1. 15 11 nuts (in three 2. 25 18 stages) 35+4 26+3 Finned nuts for exhaust pipes 160-180 118-133 Front quick-release axle nut 45-50 33-37 Clamp screws for front axle 14-18 10-13 Rear wheel studs 85 63